Container shelters are versatile, cost-effective, and sustainable space solutions, and their installation process is relatively simple. Whether you need additional storage, workspace or shelter area for specific purposes, installing a Cherry Industrial Container Shelter can be a practical solution. In this guide, we’ll walk you through the step-by-step process of installing a container shelter, and highlight key considerations along the way.
Step 1: Site Preparation
Before installation, proper preparation of the site is necessary. Here’s what you should do:
Choose a location: Choose a flat and stable location that suits your needs. Make sure it complies with local regulations and is accessible for delivery.
Prepare the ground: Clear any debris, rocks or vegetation from the site. You may need to level the ground for a stable foundation.
Check utility lines: Make sure there are no utility lines (such as gas, water or electricity) running beneath the installation area. Safety is paramount.
Step 2: Foundation Selection
The choice of foundation depends on your specific requirements and site conditions:
Concrete Slab: For the most stable and permanent installation. A concrete foundation provides a solid base for your Cherry Industrial Container Shelter.
Gravel or crushed stone: A more budget-friendly option. Suitable for temporary or semi-permanent installations. It provides good drainage properties.
Wooden sleepers: Wooden supports that provide a raised, stable surface. Ideal for uneven terrain and temporary setups.
Earth Anchors: These are mobile home anchors that are used for temporary installations. Good for locations with minimal wind exposure.
Step 3: Anchor Placement
Make sure the container shelter is securely attached to the foundation. follow these steps:
Position the anchors: The anchor points should align with the frame of the shelter. Make sure they are appropriately spaced to distribute the load evenly.
Secure the anchor: Fasten the shelter to the foundation using bolts, brackets, or other suitable fasteners. Follow manufacturer’s instructions.
Step 4: Frame Assembly
The frame of the Cherry Industrial Container Shelter provides structural support for the cover. Follow these steps for frame assembly:
Unpack and Sort: Lay out all frame components and inspect for damage or missing parts. Sort them for easy access during assembly.
Start with the end frame: Most container shelters have two end frames. First assemble these according to the instructions given. Make sure they are level and secure.
Add middle frame: Depending on the size of the shelter, you may have multiple middle frames. Connect these to the last frame to create a continuous frame structure.
Step 5: Cover Installation
The cover of a container shelter protects its contents from the elements. Here’s how to install it:
Lay the cover: Carefully drape the cover over the assembled frame, making sure it is even in the middle and on all sides.
Attach the cover: Secure the cover to the frame using the provided fasteners, such as bungee cord, ratchet straps, or tensioning system. Ensure a comfortable fit to prevent flapping in the wind.
Tension the cover: Tighten the cover to eliminate wrinkles and make sure it is tight. Pay attention to corners and edges to prevent sagging.
Step 6: Final Checks and Adjustments
Once the container shelter is assembled and the cover is secured, take a few additional steps:
Inspect for secure fastening: Check that all bolts, anchors and cover fasteners are securely tightened.
Check frame alignment: Make sure the frame is square and level. Adjust if necessary to prevent tension on the cover.
Secure any additional accessories: If your shelter includes doors, windows, or additional accessories, make sure they are properly installed and secured.
Installing container shelters is a practical and cost-effective way to create additional space for a variety of purposes. With proper site preparation, foundation selection, and careful assembly, you can enjoy the benefits of a strong and durable shelter that meets your specific needs. Whether it’s for storage, workspace, or shelter from the elements, a container shelter can be a valuable addition to your property.
